Scanjet model SC 20A LP is a tank cleaning machine especially developed for cleaning silos, tanks in industrial applications and other applicable tanks. The size, construction and cleaning requirements of these tanks are design criteria for the tank cleaning machine, which have been evaluated prior to installation in your application.
SC 20A LP tank cleaning machine consists of a gun unit that is installed in the tank and an air driven drive unit. The cleaning procedure will start by opening the valve for the cleaning media and the valve for air supply to the drive unit. The drive unit will then rotate the bottom housing, also forcing the nozzle housing to rotate around its own axis because of the gear system. This creates a criss-cross cleaning pattern on the tank walls. When the cleaning procedure is finalized the valves are to be closed.
+ Electrical external drive
+ Fixed or portable
+ Bayonet coupling
+ High impact
+ Low volume
+ Paints and coatings process vessels
+ Solvent tanks
+ Totes and IBC’s
+ Heavy duty process vessels
Flow: 1,5-10,5 m3/h (25-175 l/min, 6,5-46 gal (US)/min)
Inlet pressure: 0,4-1,2 MPa (4-12 bar, 58-175 psi)
Max. inlet pressure: 1,2 MPa (12 bar, 175 psi)
Rotation speed: 0-6 rpm
Approx. air consumption: See graph on page 8
Operating temperature: -20˚C to +40˚C (-4˚F to +104˚F)
Storage temperature: -20˚C to +40˚C (-4˚F to +104˚F)
Noise level: Earmuffs should always be used when operating machine, noise level may reach over 75 dB
Material
In contact with cleaning media: EN 1.4404, EN 1.4310, PTFE, Nitrile, EPDM
Other parts: Makers’ standard
Service space: Min 350 mm radius from centre
of deck fl ange for handling and
service
Approx weight
Machine length L=0,5 m : 5,7 kg (12,6 lb)
Per additional meter of main pipe : 1,6 kg (3,5 lb)
Drive unit : 2,2 kg (4,9 lb)